Key takeaways
- A standard double-door mag lock for a home or small-office pair of doors typically needs 600 to 1,200 pounds of holding force per leaf, while a…
A standard double-door mag lock for a home or small-office pair of doors typically needs 600 to 1,200 pounds of holding force per leaf, while a high-traffic commercial entrance usually calls for a higher-force unit plus a monitored access control system, so the right choice depends on door weight, traffic, and whether the installation needs to meet local fire and building code. This guide covers what double door magnetic locks are, how to size one, and the main features worth checking before buying.
What a Double Door Mag Lock Does
A double door magnetic lock, often sold as a “double mag” or “dual mag,” is a single housing (or paired housings) that electromagnetically holds both leaves of a double door closed, typically paired with an armature plate mounted on each door. Unlike a standard electric strike or deadbolt, a mag lock has no moving mechanical parts at the locking point itself; it holds purely through magnetic force and releases the instant power is cut, which is both its main safety feature and the reason it must be installed as part of a correctly wired access control and fire-safety system, not as a standalone lock.
Because mag locks fail open (unlock) when power is lost, they are generally considered compatible with fire egress requirements only when paired with the correct supporting hardware, such as a request-to-exit sensor, a fire alarm interface that drops power during an alarm, and in many jurisdictions a local push-button that releases the lock manually. Local building and fire code governs these requirements and varies by location, so installation should follow the applicable code and, where required, be reviewed by a licensed electrician or locksmith familiar with access-controlled egress doors.
How Holding Force Is Rated and Why It Matters
Manufacturers rate mag locks by holding force, commonly listed in pounds, which indicates how much direct pulling force the magnet can resist when the door is closed and the magnet is energized correctly. Makers typically publish this figure based on lab testing with the armature plate perfectly aligned; real-world holding force can be lower if the plate is misaligned or the door has play in its hinges. As a general guideline cited by lock manufacturers, lighter interior doors are often matched with lower-force units while exterior or heavier commercial doors call for higher-rated units, but the specific door’s weight, size, and traffic level should guide the choice rather than a single rule of thumb.
For a double door, each leaf typically needs its own armature plate and its own rated holding force sized to that leaf’s weight, even when both locks share one power supply or control unit.
At a Glance: Double Door Mag Lock Types
| Lock Type | Best For | Key Stated Features | Limits |
|---|---|---|---|
| Surface-mount dual mag lock | Retrofit installs on existing double doors | Mounted to door frame face, visible housing, moderate-to-high holding force options | Visible hardware; may need frame reinforcement on light-duty doors |
| Concealed/recessed mag lock | New construction or renovation projects | Mortised into the door frame for a cleaner look | Harder to retrofit; typically needs professional installation |
| Mag lock with built-in access control kit | Small offices wanting an all-in-one system | Bundled keypad or card reader, power supply, and exit sensor | Bundled components may be lower spec than buying parts separately |
| High-force commercial dual mag lock | High-traffic or heavy commercial doors | Higher-rated holding force per leaf, built for frequent cycling | Requires a compliant fire-alarm interface and egress hardware |
Installation and Code Notes
Mag locks on doors used for fire egress typically require a fail-safe wiring configuration (unlocked on power loss), a connection to the building’s fire alarm system so the lock releases automatically during an alarm, and a clearly marked manual release button near the door, per most fire and building codes in the United States; exact requirements vary by jurisdiction and door classification. Anyone installing a mag lock on an egress door, especially in a commercial or multi-family setting, should confirm local code requirements with an electrician, locksmith, or the local fire marshal’s office before finalizing the installation, since an improperly wired mag lock can create a life-safety hazard.
For interior, non-egress doors in a private home, requirements are generally less strict, but a correctly rated power supply and a backup power source (such as battery backup) are still worth checking for, so the lock doesn’t fail unexpectedly during a power outage.
Pick This If…
| Situation | Pick |
|---|---|
| You’re retrofitting existing double doors without major remodeling | A surface-mount dual mag lock |
| You’re doing new construction or a full renovation | A concealed/recessed mag lock |
| You want a simple, self-contained small-office setup | A mag lock with a built-in access control kit |
| The doors see heavy daily traffic or are commercial-grade | A high-force commercial dual mag lock with a proper fire interface |
| The doors are interior, low-traffic, and non-egress | A lower-force mag lock sized to door weight |
Alternatives Worth Considering
Electric strikes are a common alternative for double doors where a mechanical, fail-safe-or-fail-secure option is preferred over magnetic holding force, and they integrate with standard mortise or cylindrical locksets. Electrified panic hardware (exit devices) is frequently required, rather than optional, on commercial egress doors in many jurisdictions and should be considered instead of or alongside a mag lock for any door that serves as a fire exit. For lower-security interior applications, a standard electric deadbolt avoids some of the fire-code complexity that comes with magnetic locks on egress paths, though it is not a substitute on doors where code specifically requires listed egress hardware.
Frequently Asked Questions
Is a mag lock legal on a fire exit door?
Mag locks can be used on many fire exit doors, but only when installed with the required supporting hardware, such as fail-safe wiring, a fire alarm interface, and a manual release, per applicable local building and fire code. Requirements vary by jurisdiction, so a licensed electrician, locksmith, or the local fire marshal should confirm compliance before installation.
How much holding force do I need for a double door?
Each door leaf needs its own holding-force rating sized to that leaf’s weight, size, and traffic level; manufacturers typically publish guidance tying force ratings to general door categories. Because published force ratings assume correct alignment, choosing a unit with some margin above the door’s estimated weight is a common practice among installers.
What happens to a mag lock during a power outage?
In a standard fail-safe configuration, a mag lock unlocks automatically when power is lost, which is required for most fire egress applications. A battery backup can keep the lock engaged for security purposes during short outages, but this should still be paired with code-compliant fail-safe behavior during an actual fire alarm event.
Can I install a double door mag lock myself?
Simple interior, non-egress installations are within reach for an experienced DIYer comfortable with low-voltage wiring, but any installation involving a fire exit, commercial space, or connection to a building’s fire alarm system should be handled or reviewed by a licensed electrician or locksmith familiar with local code.
What’s the difference between surface-mount and recessed mag locks?
Surface-mount units attach to the face of the door frame and are generally easier to retrofit onto existing doors, while recessed or concealed units are mortised into the frame for a cleaner appearance but typically require more invasive installation work, making them better suited to new construction or full renovations.
What’s a reasonable budget range for a double door mag lock setup?
A basic budget-tier dual mag lock covers simple interior, non-egress doors adequately. Mid-range and premium units typically add higher holding-force ratings, better corrosion resistance for exterior use, and more robust built-in access control features, which matter more for commercial or high-traffic installations.
Further reading
- Best Sliding Door Operator System: Picks and What to Look For (2026)
- Best Quiet Garage Door Motor: Picks and What to Look For (2026)
- Best Sperry Boat Shoes: Picks and What to Look For (2026)
- Best Wines with Pizza: Picks and What to Look For (2026)
- Best 24 Inch Ventilation Fan: Picks and What to Look For (2026)
- Best Super Bright Porch Light: Picks and What to Look For (2026)